Offering used, rebuilt and NEW Air
Compressors for industry.
Below is our list of new CompAir Rotary Vane and
Rotary Screw air compressors available for sale. All of these units come
with a standard one year factory warranty, most units have optional 3, 5 &
10 year air end warranties available. If you find a
unit that your are interested in or if you would like more information, simply proceed to the feedback page and send
us your request or call us at (800) 323-8162.
In addition to the CompAir Rotary Vane and Rotary
Screw air compressors listed below, we offer other types of units -
reciprocating, oil free rotary screw, two stage rotary screw, etc. We can
also supply you with any compressed air treatment or accessory equipment you
require. If you are looking for something that is not listed below, send
us your requirement and we will let you know if we can help you.
CompAir Rotary Vane
The key to the success of the CompAir Hydrovane series
compressor is the unique rotary vane principle. The compressor operates at a
very low speed providing total reliability and long component life.
The rotor, the only continually moving part, has a number of
slots into which fit sliding vanes that ride on a film of oil. The rotor rotates
within the stator. During rotation, centrifugal force extends the vanes from
their slots, forming individual compression cells. The single rotor
design, running at standard motor speeds allows direct drive arrangement -
making the CompAir Hydrovane compressors simple to operate and maintain.
With over half a million CompAir vane compressor users world wide, we are sure
we can satisfy your requirements.
All models are available as standard 'open' units or can be upgraded using
CompAir's comprehensive range of accessories. Enclosed units are available
from 5 to 30HP.
The VRS rotary vane compressors (using state-of-art inverter control) have
been designed to meet the demand of industry for better energy efficiency,
resulting in significant energy cost savings for our customers. Pressures
options of 100 to 145psig Powers range from 10 to 50HP.
Download Hydrovane literature
CompAir Rotary Screw
A range of compressed air systems to suit all
applications
Industries, both large and small, rely
on CompAir rotary screw compressors for a supply of consistently high quality
compressed air. Pre packaged with single connections for power supply,
compressed air and built in cooling systems the installation of all CompAir
L-series compressors is greatly simplified. CompAir has a rotary screw range of
compressors from 10HP to 335HP.
Screw compression elements are
manufactured in-house using the latest CNC rotor grinding machinery, coupled
with on-line laser technology, in order to maintain precise manufacturing
tolerances. The resulting reliability and performance ensure that operating
costs will remain low throughout the compressor life.
High performance and efficiency
The high capacity compression element,
with low rotor tip speeds and optimized oil injection, gives high efficiency
with maximum reliability. The latest CompAir designs ensure low system and
compressed air temperatures. The guarantees excellent cooling and maximum
service life for all components.
A maintenance free, reliable and
effective drive concept
The compression element is driven at
optimum speed for the application through a high efficiency V-belt system. The
unique automatic belt tensioning device ensures correct belt tension at all
times, reduced loading when off load and during start up, minimizes slip and is
completely maintenance free during normal operation.
Low service costs
The innovative compressor design saves
unnecessary service cost. All component parts are designed for a long service
life. and the generously sized suction filters, oil filters and fine separators
ensure excellent compressed air quality. All oil filters, and on the models up
to 22kW (30HP) the separator elements, are spin on/off further minimizing
service time. The Quick access service points allow servicing to be conducted in
minutes and minimizing downtime and service costs.
Built in intelligent controls
Close operational control is essential
to reduce running costs. All CompAir rotary screw compressors are supplied with
intelligent, fully electronic controllers with simple controls and a
user-friendly menu.
L07-L22 (10-30HP) Rotary Screw Compressors
L30-L75
(40-100HP) Rotary Screw Compressors
L90-L250 (125-330HP) Rotary Screw Compressors
Speed regulated compressors
The CompAir LSR-series compressors
compliment the standard L-series range and utilize a unique switched reluctance
variable speed drive system. The drive system enables the compressor to match
output to varying demands and as a result provide considerable energy savings.
Adding an LSR compressor to any installation of standard L-series compressors
gives the entire system the ability to precisely match output to demand allowing
the compressors to consume exactly the right amount of energy to do the job, and
no more. Units currently range in size from 45KW (67HP) to 120KW (171HP).
L45SR-L75SR-L120SR Speed regulated rotary screw
compressors
Oil free compressors
| D22HRS – D37HRS The CompAir range
of oil-less compressors can be relied upon to deliver a
consistent flow of high quality, clean and economical
compressed air.
At the heart of the compressor is an innovative single
screw compression element, featuring a single main rotor
with 6 flutes meshing with a pair of 11 tooth gate rotors,
that is proven in thousands of installations.
Compression takes place in two chambers above and below
the main rotor, as a result compression loads are balanced
and bearing loads are significantly reduced. The low bearing
loads extend compression element life and significantly
reduce lifetime operating costs.
D50H SR – D75H SR
Maximum efficiency at any level of
demand
cuts energy costs and saves money
New 3-phase motor with increased
performance TEFC construction IP55
effects
• High reliability
• High energy efficiency
• Nominal max. power is continuously
availableThe CompAir range of
oil-less compressors can be relied upon
to deliver a consistent flow of high
quality, clean and economical compressed
air.
At the heart of the compressor is an
innovative single screw compression
element, featuring a single main rotor
with 6 flutes meshing with a pair of 11
tooth gate rotors, that is proven in
thousands of installations.
Compression takes place in two
chambers above and below the main rotor,
as a result compression loads are
balanced and bearing loads are
significantly reduced. The low bearing
loads extend compression element life
and significantly reduce lifetime
operating costs. |
|
DH-Series Oil-Less Rotary Screw Compressors
Can't find what you're looking for?
Send us your request and we'll see if we can.
